Research / Robotic fabrication

Active wood
bending.

IAAC, Barcelona
2019

Steaming, robotic bending and controlled cooling translate timber behaviour into repeatable fabrication.

01 / Robotic fabrication — three-dimensional bends

01 / Material & process

Steam. Bend.
Hold.

Timber is steamed, bent by a robotic arm and held while it cools. The workflow connects material preparation with controlled movement.

Close-up of robotic tooling holding a curved timber strip
Material preparation
Digital visualization of robotic movement during timber bending
Robotic movement & feedback
Experimental timber study showing a series of curved wooden strips

02 / Geometry & feedback

From planar curves
to spatial bends.

Analogue trials develop into robotic sequences, extending the study from two-dimensional curves to three-dimensional geometries.

Material behaviour / Toolpath / Iteration

02 / Material & tooling

Robotic bending.
Tooling constraints.

Timber is steamed, bent by a robotic arm and held while it cools. The base restraint and gripper introduce local kinks, making fixture geometry a key part of the study.

01 / Robotic bending setup
02 / Gripper assembly
03 / Base restraint
04 / End-effector
View research board
Research overview / Robotic Active Wood Bending

03 / Architectural application

A bending
catalogue.
A façade strategy.

The resulting geometries inform a façade study for the Plug-In Building by People’s Architecture Office.

01 / Lower level — relative strip count: x
02 / Middle level — relative strip count: x/2
03 / Upper level — relative strip count: x/4

IAAC / Master in Robotics and Advanced Construction / 2019

Alexandros Varvantakis · Cedric Droogmans · Roberto Vargas

Faculty: Alexandre Dubor · Raimund Krenmueller

04 / Physical model

Bent timber.
Geometric assembly.

A physical study of bent timber strips, comparing curvature, spacing and orientation. The assembly brings individual bending geometries together within a single material model.

Physical timber model comprising a series of bent wooden strips and small connecting pieces against a black background
Physical model / Bent timber assembly
Previous
Previous

Re - Genesis

Next
Next

Structural Continuity